top of page

S O G E D I C O M 

Groupe de sogedicomtraduction

Public·275 membres

Fidel Medvedev
Fidel Medvedev

Samsung ML-1640 Toner Reset: What You Need to Know About Firmware V1.01.00.91



Samsung ML 1640 V1.01.00.91 Toner Reset: Everything You Need to Know




If you own a Samsung ML 1640 laser printer with firmware V1.01.00.91, you may have experienced some issues with the toner cartridge. The printer may display a "Toner Exhausted" message on the red LED or stop printing altogether. This is because the toner cartridge has reached its maximum page count and needs to be reset.




samsung ml 1640 v1.01.00.91 toner reset



Resetting the toner cartridge is a simple process that can help you save money and extend the life of your toner cartridge. In this article, we will explain how to reset the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91 and how to refill it if needed.


What is a toner cartridge and why does it need to be reset?




A toner cartridge is a consumable part of the printer that contains the toner powder that is used to print on the paper. The toner cartridge has a limited lifespan and can print a certain number of pages before it runs out of toner.


The printer monitors the toner level and displays a warning message when the toner is low or empty. However, sometimes the printer may not accurately detect the toner level, especially if you refill the toner cartridge or use a non-original cartridge. This may cause the printer to stop working prematurely or print poor quality pages.


To fix this problem, you need to reset the toner cartridge so that the printer can recognize it as a new one and reset the page count. Resetting the toner cartridge can save you money and reduce waste by extending the life of your toner cartridge.


How to reset the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91?




There are different methods to reset the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91, depending on whether it has a chip or not.


The starter cartridge that came with your printer does not have a chip, so you cannot reset it by shorting two pins on the chip. However, you can try the following steps to reset it:


  • Turn off the printer and disconnect the power cord.



  • Open the front cover and remove the toner cartridge.



  • On the back of the toner cartridge, you will see three metal contacts. Cover them with a piece of tape or paper.



  • Reinsert the toner cartridge and close the front cover.



  • Reconnect the power cord and turn on the printer.



  • The printer should recognize the toner cartridge as a new one and reset the page count.



  • Print a test page to check if the toner level is correct.



  • If everything works fine, you can remove the tape or paper from the metal contacts.



This method may not work for all versions of firmware or toner cartridges. If it does not work for you, you may need to update your firmware or buy a new toner cartridge with a chip that can be reset.


How to refill the toner cartridge of your Samsung ML 1640 printer?




If you want to refill the toner cartridge of your Samsung ML 1640 printer yourself, you need to buy a toner refill kit that is compatible with your printer model. The toner refill kit usually contains a bottle of toner powder, a syringe, a funnel, and instructions.


Here are some general steps to refill your toner cartridge:


  • Turn off the printer and disconnect the power cord.



  • Open the front cover and remove the toner cartridge.



  • Locate the fill hole on the side of the toner cartridge and make it bigger with a drill or a screwdriver if needed.



  • Shake the bottle of toner powder well and insert the funnel into it.



  • Insert the syringe into the funnel and draw some toner powder into it.



  • Insert the syringe into the fill hole and inject some toner powder into it slowly and evenly.



  • Repeat steps 5 and 6 until you fill up about 80% of the capacity of the toner cartridge.



  • Cover the fill hole with some tape or plastic plug.



  • Reinsert the toner cartridge and close the front cover.



  • Reconnect the power cord and turn on the printer.



The printer should recognize the refilled toner cartridge as a new one and reset


  • the page count.



Print a test page to check if


  • the print quality is good.



You should be careful not to overfill or damage


the toner cartridge by refilling it improperly.


You should also check


the print quality regularly


and replace


the toner cartridge when it is worn out or defective.


Conclusion




In this article, we have explained how to reset


the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91


and how to refill it if needed.


Resetting


the toner cartridge can help you save money


and extend


the life of your


toner cartridge.


However,


you should follow


the instructions carefully


and use


the compatible products for your printer model.


We hope this article was helpful for you


and solved your problem.


If you have any questions or feedback,


please leave them in


the comments below.


What are the benefits of resetting and refilling your Samsung ML 1640 toner cartridge with firmware V1.01.00.91?




By resetting and refilling your Samsung ML 1640 toner cartridge with firmware V1.01.00.91, you can enjoy many benefits, such as:


  • Saving money: You can reuse your toner cartridge multiple times and avoid buying a new one every time it runs out of toner. This can save you a lot of money in the long run.



  • Reducing waste: You can reduce the amount of plastic and metal waste that is generated by disposing of your toner cartridge. This can help protect the environment and conserve natural resources.



  • Improving print quality: You can ensure that your toner cartridge always has enough toner to print high-quality pages. You can also avoid printing with low or empty toner, which can cause streaks, smudges, or faded colors.



  • Extending printer life: You can prevent your printer from malfunctioning or breaking down due to low or empty toner. You can also avoid damaging your printer by using compatible products that are designed for your printer model.



However, you should also be aware of some drawbacks of resetting and refilling your Samsung ML 1640 toner cartridge with firmware V1.01.00.91, such as:


  • Voiding warranty: You may void your printer warranty if you use non-original or refilled toner cartridges. This means that you may not be able to get technical support or repair service from the manufacturer if your printer has any problems.



  • Risking damage: You may damage your toner cartridge or printer if you reset or refill them incorrectly or use incompatible products. This may cause leaks, spills, clogs, or errors that can affect your print quality or printer performance.



  • Losing features: You may lose some features or functions of your printer if you use non-original or refilled toner cartridges. For example, you may not be able to monitor the toner level or get alerts when the toner is low or empty.



Therefore, you should weigh the pros and cons of resetting and refilling your Samsung ML 1640 toner cartridge with firmware V1.01.00.91 before deciding to do so.


How to update your firmware or buy a new toner cartridge with a chip that can be reset?




If resetting and refilling your Samsung ML 1640 toner cartridge with firmware V1.01.00.91 does not work for you, you may need to update your firmware or buy a new toner cartridge with a chip that can be reset.


Updating your firmware is a process that involves downloading and installing the latest version of software for your printer from the manufacturer's website . This can help fix some bugs or errors that may prevent your printer from recognizing or resetting your toner cartridge.


To update your firmware, you need to follow these steps:


  • Go to the Samsung website and find the support page for your printer model.



  • Download the latest firmware file for your printer and save it on your computer.



  • Connect your printer to your computer with a USB cable and turn it on.



  • Run the firmware file and follow the instructions on the screen to complete the installation.



  • Restart your printer and check if it recognizes or resets your toner cartridge.



Buying a new toner cartridge with a chip that can be reset is another option that you can consider if updating your firmware does not work for you. A chip is a small electronic device that is attached to the toner cartridge and communicates with the printer. It stores information such as the toner level, page count, and expiration date of the toner cartridge.


A chip that can be reset is a chip that can be modified or replaced to reset the information stored on it. This can help you reuse your toner cartridge multiple times and avoid buying a new one every time it reaches its maximum page count.


To buy a new toner cartridge with a chip that can be reset, you need to do the following:


  • Find a reputable online store or seller that sells compatible toner cartridges with chips that can be reset for your printer model .



  • Select the toner cartridge that matches your printer model and firmware version and place your order.



  • Wait for your order to arrive and replace your old toner cartridge with the new one.



  • Reset the chip on the new toner cartridge by following the instructions provided by the seller or using a special tool .



Print a test page to check if


  • the print quality is good.



However, you should also be careful when buying a new toner cartridge with a chip that can be reset online, as some sellers may sell low-quality or counterfeit products that may not work properly or damage


your printer.


Conclusion




In this article, we have explained how to reset


the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91


and how to refill it if needed.


We have also discussed


the benefits and drawbacks of resetting and refilling


your toner cartridge


and how to update


your firmware or buy


a new toner cartridge with


a chip that can be reset.


We hope this article was helpful for you


and solved


your problem.


If you have any questions or feedback,


please leave them in


the comments below.


Conclusion




In this article, we have explained how to reset


the toner cartridge of your Samsung ML 1640 printer with firmware V1.01.00.91


and how to refill it if needed.


We have also discussed


the benefits and drawbacks of resetting and refilling


your toner cartridge


and how to update


your firmware or buy


a new toner cartridge with


a chip that can be reset.


We hope this article was helpful for you


and solved


your problem.


If you have any questions or feedback,


please leave them in


the comments below. ca3e7ad8fd


À propos

Bienvenue dans le groupe ! Vous pouvez communiquer avec d'au...

membres

bottom of page